Install the shower nozzle  

1. Sprinkler head is very fragile, absolutely can't knock against, be sure to protect. Its surface is aluminum, layer coated on the crystal oscillator refill tube with very small. A touch will be sunken, deformation, fracture, even as nozzle is discarded;

2. Also be careful when installing sprinkler, be sure to first power, and put in place. Installed, with handle gently pushing a car around mobile, check whether smooth, don't pack good electricity, because, if not in place, the car move easily fractured to bump his head, and the hand feel, close put freely, strong controllability;

3. Plug cable, don't bring the ink, and to ensure good contact with the socket, don't touch the feet, otherwise, will cause short-circuit burning nozzle;

4. Steel shaft is clean and smooth, flannel cloth sticking point lubricating oil is wiped, don't directly into shaft, excess oil will flow to the nozzle, the damage;

5. Machinery, circuit is correct, will test water, take a look first at the cartridge within the water foot shortage; Second, check whether small cleaning doctor blade, ink absorption pump dirt;

6. Just mount the shower nozzle in air, so will not immediately print is normal, normal only after the head of the air discharge completely out line; First of all, the available batch cleaning (a clean only 2 times, then stop after 30 minutes cleaning 2) again many times kept clean excessive, and will cause the cleaning pump JiMo, mixed color, not only can make the printing ink leakage, also a waste of ink; Second, to print some more pictures, let the nozzle in working out the air; Again, if the machine has led to the waste refill tube, can power first, put a rubber tube with a syringe to smoke waste refill tube, until take 3 to 5 ml ink, and then boot, use washing machine is normal, this is equal to artificially give out, the head of the air side effect is likely to cause heap ink cleaning pump.

A non-professional nozzle need to be aware of the place many, so blind to replace artificial damage