Daily maintenance

A, the maintenance of the inkjet printer

1, have to make sure the printer has a solid platform for the work, do not place any items at the top of the printer.

2, printer when printing must close the front cover, to prevent dust from entering the machine or other hard objects obstruct the printer in the car's movement.

3, ban charged plug printer cable, that this might damage the printer to print and PC parallel port mouth, serious and even might damage the PC motherboard.

4, if the print is not very clear, can use the printer function of the automatic cleaning cleaning nozzle.

5, when the print head to go back to the initial position and to boot, the printer will first get the print head back to the initial position, then the operation of the cleaning nozzle, so will cause unnecessary waste of ink. Solution to this problem is often the wipe away the dust on the guide shaft, and the guide shaft lubrication (choose good lubricating oil liquid, such as sewing machine oil).

Second, to ensure the surrounding environment clean

1, the working environment of dust is too much, easy to cause the car guide shaft, poor lubrication to the print head in print

The process of moving up, cause the print position is not accurate or impact mechanical frame damage and freezes.

2, working environment, dust is too much, easily lead to print pictures of sticky dust and effect.

3, the machine is best in no dust (less) in the room.

Coating treatment fluid used to introduce coating liquid to print in a variety of media in the unconstrained and develop products.. On the coating of medium can print out various patterns and text. A type,

Features:

A liquid without preparation.

Maintain good color.

Quick drying, homework.

Water resistance is strong.

Slight color.

With no light, half light, suitable for low intensity of work. Packing unit:

Type spray adhesive (420 ml), bulk (1 l, 4 l, 18 l) method of use:

1) the rust on the surface of the medium, water, clean oil, dirt and other processing.

2) on the surface of the medium that clean the method of using brush, roller, spray evenly coated with the coating.

3) with good coating medium dry in a dust-free environment.

4) the dry good medium according to the print method to print.

5) printed medium dry in a dust-free environment. 12 minutes (under normal temperature for 3-5 minutes under 120 ℃) others:

In the printing surface is completely dry before please don't touch, if you use the spray type adhesive coating fully shake before use 1 minute, please.

A hybrid

Features:

Two liquids. (ratio: the main agent and curing agent 9:1)

Gloss and colour and lustre of maintenance.

As a sex, and excellent chemical resistance.

The solid, good resistance to water.

The coating color.

The strength of the coating is high. Packing unit:

Bulk (1 l, 4 l, 18 l) method of use:

1) the rust on the surface of the medium, water, oil, dirt and other processing clean.

2) in a clean medium surface by using the method of brush, roller, spray evenly coated with the coating.

3) with good coating medium dry in a dust-free environment.

4) the dry good medium according to the print method to print.

Check out 5) printed on dry clean environment (room temperature for 12 minutes, for 3-5 minutes under 120 ℃). Other:

In the printing surface is completely dry before please do not touch. Note: when using liquid coating processing

- coating processing work environment should be well ventilated, the air circulation.

- to stay away from fire and heat source.

- try not to let foreign body contact with the liquid coating processing, can affect the surface of the coating.

- don't coating mixture with other brands.

- avoid environmental humidity is too big, because of the moisture of coating form bleaching or bubbles.